September 2018 Technical Presentation – BASF Dispersants
Bio: Tony Moy, Technical Specialist, BASF Formulation Additives
Tony Moy has been with BASF for 6 years. He has been in his current role as Technical Specialist for BASF Formulation Additives for 2.5 years, with product focus on dispersants and market focus on industrial segments. Prior to this, he held the role of Process Development Engineer for BASF Dispersions and focused on scale up of rheology modifier and defoamer product lines. Tony had worked for DuPont for 23 years in a variety of roles before joining BASF. He has 18 years of experience as a Resin and Dispersion Engineer in the DuPont Performance Coatings (Automotive) business, focusing on resin synthesis, dispersion scale-up, and dispersion color science/formulations. Educational background: MS Chemical Engineering, Northwestern University; MBA, Wake Forest University.
Abstract: Dispersants – Why and How to Use Them
Dispersants bring a unique value proposition to coatings. The primary purpose of dispersing agents is to gain the optimal value of a pigment in a coating (minimum concentration with desired performance/properties and stability). How dispersants function in a coating and the advantages of their use will be explained in this talk. In addition, guidance will be provided on the selection of dispersing agents, optimization of the level of usage, process considerations, and examples of applications will be discussed. The goal of the talk is to provide the audience with a deeper insight to this additive technology and a good basis of understanding with which to incorporate it into future coatings applications.
When: Tuesday, Sept 11th
Where: Stanford’s @ Lloyd Center: 913 Lloyd Center; Portland, OR 97232; 503.335.0811 (plenty parking in garage off NE Multnomah St.)
Cost:
$0 for manufacturing members
$20 for retired persons
$25 for all others
Typical Schedule (flexible with goal start time of 11:30AM):
11-11:30AM: Registration
11:45AM: Lunch orders
12PM: Introduce speakers & announcements
12:20PM: Lunch served
September 2018 Technical Presentation – BASF Dispersants
BASF’s Tony Moy will be in-town to discuss: Application of Dispersants in Coatings
- Date: Tuesday, September 11th
- Where: Claim 52’s Taproom; 1030 Tyinn Street; Eugene, OR 97402; TAKE NOTE IT’S IN A WARESHOUSE COMPLEX, SO DRIVE INTO THE PARKING LOT UNTIL YOU ‘SEE THE SIGN’
- Time: Evening event from 5-7:30 PM (check-in from 5-5:30 with start shortly thereafter)
- Cost: Free for manufacturing members, $20 for retirees, $25 for all others
Bio: Tony Moy, Technical Specialist, BASF Formulation Additives
Tony Moy has been with BASF for 6 years. He has been in his current role as Technical Specialist for BASF Formulation Additives for 2.5 years, with product focus on dispersants and market focus on industrial segments. Prior to this, he held the role of Process Development Engineer for BASF Dispersions and focused on scale up of rheology modifier and defoamer product lines. Tony had worked for DuPont for 23 years in a variety of roles before joining BASF. He has 18 years of experience as a Resin and Dispersion Engineer in the DuPont Performance Coatings (Automotive) business, focusing on resin synthesis, dispersion scale-up, and dispersion color science/formulations. Educational background: MS Chemical Engineering, Northwestern University; MBA, Wake Forest University.
Abstract: Dispersants – Why and How to Use Them
Dispersants bring a unique value proposition to coatings. The primary purpose of dispersing agents is to gain the optimal value of a pigment in a coating (minimum concentration with desired performance/properties and stability). How dispersants function in a coating and the advantages of their use will be explained in this talk. In addition, guidance will be provided on the selection of dispersing agents, optimization of the level of usage, process considerations, and examples of applications will be discussed. The goal of the talk is to provide the audience with a deeper insight to this additive technology and a good basis of understanding with which to incorporate it into future coatings applications.
Please RSVP to Molly Wynveen: mwynveen@forrestpaint.com
Speaker: Royce Mathews, Wax Business Development Manager, Munzing US
Title: Wax Additives as Surface Modifiers for Coatings
Abstract: Wax additives are used as surface modifiers in coating formulations and printing inks to provide antiblocking, COF control, matting, hydrophobicity, burnish and abrasion resistance. Besides the chemical nature of the waxes, the particle size distribution, concentration, substrate, form of delivery and curing conditions are all equally important to consider for achieving the desired surface properties. The presentation provides guidelines for selecting a wax to get the optimal performance in your coating
Bio: Royce Mathews is a Wax Business Development Manager at Munzing US. He brings over 25 years of expertise in the application of current and emerging technologies in coatings and additives industry. He has a proven record of solving on-site and technical challenges, new product development and client retention. He has garnered knowledge from past roles as Technical Product Manager, Senior Research Chemist/Project Manager, and Senior Chemist for Polymer Synthesis and Coatings Application at Lubrizol, Cargill, McWhorter Technologies and Eastman respectively. Royce is a graduate of DePaul University has a M.S in Polymer Science and Coatings Technology and also holds a M.S in Physical Chemistry.
Cost:
$0 for manufacturing members
$20 for retired persons
$25 for all others
Typical Schedule (flexible with goal start time of 11:30AM):
11-11:30AM: Registration
11:45AM: Lunch orders
12PM: Introduce speakers & announcements
12:20PM: Lunch served
Speaker: Royce Mathews, Wax Business Development Manager, Munzing USA
Title: Wax Additives as Surface Modifiers for Coatings
Abstract: Wax additives are used as surface modifiers in coating formulations and printing inks to provide antiblocking, COF control, matting, hydrophobicity, burnish and abrasion resistance. Besides the chemical nature of the waxes, the particle size distribution, concentration, substrate, form of delivery and curing conditions are important to consider. for achieving the desired surface properties.
The presentation provides guidelines for selecting a wax to get the optimal performance in your coating
Bio: Royce Mathews is a Wax Business Development Manager at Munzing USA. He brings over 25 years of expertise in the application emerging technologies in coatings and additives industry. Royce has a proven record of solving technical challenges, new product development and client retention. His garnered knowledge from past roles as Technical Product Manager, Senior Research Chemist/Project Manager, and Senior Chemist for Polymer Synthesis and Coatings Application at Lubrizol, Cargill, McWhorter Technologies and Eastman respectively.
Royce is a graduate of DePaul University has a M.S in Polymer Science and Coatings Technology and also holds a M.S in Physical Chemistry.
Typically, we’re excited to bring 4 speakers to the 1/2 day seminar. At this time we have the following companies confirmed:
- TBF Environmental (http://tbfenvironmental.com/)
- Ashland Specialties, Inc. (https://www.ashland.com/)
Cost:
$0 for manufacturing members
$20 for retired persons
$25 for all others
We’re excited to bring 4 speakers to the 1/2 day seminar.
- Greg Monaghan of Specialty Polymers
- David A. Pasin of TBF Environmental (http://tbfenvironmental.com/)
- Natalia Amoroso Lopes Valezin of Ashland Specialties, Inc. (https://www.ashland.com/)
- Lanxess Biocides
Speaker: Dr. Robert Sandoval, R&D Technical Manager at EPS.
Abstract: Adhesion to a substrate is a key fundamental property for most classes of coatings. Unless one is designing a removable coating, high adhesion is typically desired. However, due to the wide range of substrates that exist, designing a single resin and coating formulation that adheres to the multitude of surfaces that an end user may coat (while maintaining other performance properties) is challenging. Additionally, as the coatings industry converts more to waterborne technologies, strategies that were once used to improve adhesion are no longer an option. In this talk, an overview of common substrates and strategies that have been employed to adhere to them will be presented. For example, low surface energy substrates such as thermoplastic olefin (TPO), polyvinyl chloride (PVC), and others are notoriously difficult to adhere to due to their lack of chemical functionality to improve adhesion and typically require a solvent-based (i.e., high VOC) solution. Data will be presented showing how newly developed waterborne acrylic resins and their coatings formulation can impact, and in the case of resin choice, dramatically improve adhesion, especially to metal, TPO, asphalt, and other hard-to-stick-to surfaces
Cost:
$0 for manufacturing members
$20 for retired persons
$25 for all others
Typical Schedule (flexible with goal start time of 11:30AM):
11-11:30AM: Registration
11:45AM: Lunch orders
12PM: Introduce speakers & announcements
12:20PM: Lunch served
Bio: Dr. Robert Sandoval is a R&D Technical Manager at EPS, leading the Industrial and Construction coatings group. He earned a B.S. in Chemical Engineering from Michigan Technological University in 2005 and a Ph.D. in Chemical Engineering from Northwestern University in 2010, focusing in polymer physics and engineering. Dr. Sandoval spent four years at Dow Chemical before joining EPS in 2014. His industrial research has focused on mixing and emulsification technologies and coating formulations and testing. His technical contributions have helped to commercially launch several platform technologies at EPS, including new high gloss architectural resins, interior & exterior flat through semi-gloss resins, and roof coatings.
Abstract: Adhesion to a substrate is a key fundamental property for most classes of coatings. Unless one is designing a removable coating, high adhesion is typically desired. However, due to the wide range of substrates that exist, designing a single resin and coating formulation that adheres to the multitude of surfaces that an end user may coat (while maintaining other performance properties) is challenging. Additionally, as the coatings industry converts more to waterborne technologies, strategies that were once used to improve adhesion are no longer an option. In this talk, an overview of common substrates and strategies that have been employed to adhere to them will be presented. For example, low surface energy substrates such as thermoplastic olefin (TPO), polyvinyl chloride (PVC), and others are notoriously difficult to adhere to due to their lack of chemical functionality to improve adhesion and typically require a solvent-based (i.e., high VOC) solution. Data will be presented showing how newly developed waterborne acrylic resins and their coatings formulation can impact, and in the case of resin choice, dramatically improve adhesion, especially to metal, TPO, asphalt, and other hard-to-stick-to surfaces
Jonathon Bird of Lubrizol’s Performance Coatings Group will be giving a presentation, details TBD.
Cost:
$0 for manufacturing members
$20 for retired persons
$25 for all others
Typical Schedule (flexible with goal start time of 11:30AM):
11-11:30AM: Registration
11:45AM: Lunch orders
12PM: Introduce speakers & announcements
12:20PM: Lunch served
Water-Based Dispersants for High-Performance End Use Applications
ABSTRACT
Paint formulators face significant challenges in producing high performance coatings in water based finishes. Dispersing pigments in water is more challenging than solvent based systems. The lower VOC’s of today’s finishes and tomorrow’s future needs push the boundaries of traditional dispersant technology. In addition to wetting and stabilization, it is difficult to eliminate the negative effects of traditional dispersants in the final film properties for the high-performance finishes required in today’s markets.
In this presentation we will introduce our latest developments in water-borne dispersants. We have optimised dispersant performance through the control of polymer architecture, molecular weight and nature of our anchor groups. We have developed novel dispersants that are excellent at both wetting and stabilizing colorants for paints as well as improve the end use properties of high performance finishes. We will show examples of improved corrosion resistance in a direct to metal finish, improved spot resistance in a high performance black finish, improved tensile and elongation retention in roof coatings, as well as many other examples.
Speaker Bio: Dennis Butcher Technical Marketing Manager
Dennis is the Technical Marketing Manager for the Performance Coatings at Lubrizol Advanced Materials. He provides technical support to the western region. He joined Lubrizol in 1990 as a Sr. Chemist. Since then he has held numerous technical management and commercial roles throughout his tenure. Prior to Lubrizol, he worked in the printing ink industry formulating aqueous inks for advertising and news. Dennis holds a B.S. degree in Chemistry from SUNY Fredonia.